Stainless steel dosing pots are used in order to feed liquid chemicals such as corrosion inhibitors into closed re-circulating water systems (chilled or hot water). The system can be simply dosed on a regular / manual basis by use of these dosing pots.
Dosing pots consist of a stainless steel vessel with inlet (return) and outlet (flow) valves, a drain valve and a filling valve they come with a stainless steel tundish, air release valve, wall mounting brackets and a non-return valve.
Fitted across flow and return lines, they provide a means to annex a portion of the system water which can be drained away and replaced with the chemical to be dosed. When re-connected to the system, the chemical is flushed through.
The dosing pots are fitted with large 1" valves, which ensure quick and easy action of the pot even in low flow/pressure conditions. An air vent valve enables the pot to be purged during filling thus eliminating undesirable air ingress to the system. A NRV check valve is fitted into the fill line below the tundish.
Product Code: DP 20
Max. Working Pressure: 10 Bar
Tested to: 21 Bar
A - 320mm
B - 685mm
C - 1142mm
D - 220mm
Welded to BS EN 287
Designed to PD 5500:2009 category 3
3.5 - 25 Litre Capacity
The dosing pot is designed for the conditions stated on the name plate, the system into which the dosing pot is installed should have adequate protection to ensure the dosing pot is operated within these limits at all times.
Next Day Available
10 Year Warranty
Write Your Own Review
Color sit amet, consectetur adipiscing elit. In gravida pellentesque ligula, vel eleifend turpis blandit vel. Nam quis lorem ut mi mattis ullamcorper ac quis dui. Vestibulum et scelerisque ante, eu sodales mi. Nunc tincidunt tempus varius. Integer ante dolor, suscipit non faucibus a, scelerisque vitae sapien.