DAB Evoplus B Small 40/220.32M Circulating Pump - Single Head
DAB Evoplus B Small 40/220.32M Circulating Pump - Single Head
EVOPLUS circulation electronic pumps can be used in heating, ventilation, and air conditioning systems for residential and commercial buildings. In all correctly sized installations the electronically controlled wet rotor pumps ensure sufficient power and lower noise emissions, greater comfort and a significant reduction in running costs.
- Large residential buildings
- Condominiums and small apartment buildings
- Real estate buildings
- Private and public hospitals
- Office buildings
- Single version or Twin version available.
- Asssibility of 0-10 V or PWM external signal control, and connection to ModBus management systems (LonBus with appropriate additional communication module), with the use of the optional Multifunction module (supplied as standard for the twin version).
The heating required for the different applications varies significantly during day and night, due to the external temperature, or the degree of occupancy inside the areas. To the above, one must add the different needs of the various environments, and the opening or closing of the various circuit branches of complex systems. Electronic wet rotor pumps ensure at all times, and virtually in all correctly sized systems, a sufficient level of energy, together with a quieter operation, and more comfort, together with an important reduction of operating costs.
Unlike conventional electronic pumps, EVOPLUS electronic circulators can be used also in air conditioning systems where the temperature of the pumped liquid is lower than the room temperature. In these conditions, condensation tends to form on the outer surface of the circulator, which however does not affect the operation of the electronic and the mechanical components. The unit is designed and sized in such a way that it allows condensation to drain without damage to the construction components.
The SAN version, with bronze pump body, was specifically developed for the recirculation of sanitary water. With the constant temperature mode of operation, the temperature inside the recirculation piping is controlled without the need for thermostat valves, therefore optimising comfort.
Monobloc circulation pump consisting of the cast iron hydraulic section, and the wet rotor synchronous motor. Aluminium motor casing. Scroll type pump body featuring high hydraulic efficiency thanks to highly precise design and smooth internal surfaces. In-line suction and delivery ports. The single version is supplied as standard with insulating casing, to avoid heat dispersion and/or the formation of condensation on the pump body. For the twin version, the insulation must be provided by the installer. In any case, pay attention not to obstruct the condensation drainage ducts, to avoid impairing the operation of the circulator. The EVOPLUS circulators for small collective systems are connected to the power input line using a practical connector with plug supplied as standard, which makes the operation quick and easy. Technopolymer impeller, aluminium motor shaft on graphite bushings lubricated by the pumped liquid. Stainless steel rotor protection liner. Ceramic thrust ring, ethylene-propylene seal rings and carbon fibre composite stator liner. Asynchronous motor with permanent magnet rotor. The twin version features an automatic swing check valve incorporated in the delivery port, to avoid water recirculating through the unit when this is not running; in addition, a blank flange is also supplied as standard, to allow either of the two motors to be removed for servicing. PN 16 standard pump body execution, flanged with 4 holes, compatible with PN 6 / PN 10 / PN 16 counter flanges, to ensure the interchangeability of the pumps in existing systems.
|Model||Evoplus B Small 40/220.32M|
|Max Flow||7.8 m3/Hr|
|Max Head||4 m|
|Voltage||240V 1Ph 50Hz|
|Full Load Current (FLC)||0.55A|
|Motor Size (kW/W)||85W|
|Dimensions (kW/W)||165mm High x 220mm Wide x 256mm Deep|
|Material (kW/W)||Cast Iron|
|Pump couplings||DN32 PN6|
|Liquid temperature range||from -10 °C to +110 °C|
|Working pressure||16 bar (1600 kPa)|
|Protection rating||IP 44|
There are no reviews yet.
Free delivery relates to MOST products on the Website over the value of £100.00 (excluding VAT).
*Unless otherwise stated on individual items*
Products purchased under £100.00 will incur a £6.95 delivery charge.
Standard Delivery Orders over £100.00 (3-5 working days)* - Free shipping for in stock items to mainland UK*.
Next day shipping is only available for stock items which are ordered before 14:00 at a charge of £12.50*. Any orders that are placed after this time will be processed the following day.
Specified delivery times are based on orders placed before 2pm Monday to Friday (excludes Weekends and Bank Holidays) - for more details please see "UK Shipping Charges" below.
Weekend or orders placed on a Bank holiday will be dispatched on the next working day.
*Excludes UK Islands, Republic of Ireland and Scottish Highlands.
During Christmas and New Year our warehouse will be closed. Orders over this period will be dispatched on the first working day after New Year.
Delivery times are subject to change if the item is out of stock with our supplier. There are products on our Website that are not stocked at our warehouse, nor with our manufacturer's UK warehouses, therefore lead times can vary. This is why we recommend you contact us prior to purchasing to check current stock levels and lead times.
If you are not available to take a delivery on the specified date, you must let us know immediately. If we attempt to deliver your order and no-one is in, a re-delivery charge may be incurred.
As we use 3rd party delivery agents, Complete Pump Supplies are unable to guarantee that all deliveries will be the next working day. Complete Pump Supplies will not be liable for any loss of income, loss of profits, loss of markets, loss of reputation, loss of customers, loss of use, loss of an opportunity even if we had knowledge that such damages or loss might arise or for any indirect, incidental, special or consequential damages or loss howsoever arising.