Flamco Flexfiller Mini 230D Pressurisation Unit - Twin Pump

Flamco Flexfiller Mini 230D Pressurisation Unit - Twin Pump Wall Mounted
 

Compact and totally enclosed digital pressurisation units with electronic pressure transducer and user-friendly microprocessor for use on sealed system in order to provide a minimum system pressure requirement. The Flexfiller Mini Digital is a slim wall mounted, low flow rate (0.4 l/min) top-up pressurisation unit with 2 litre internal break tank. Ideal for small commercial or large domestic applications. For use on heating systems utilising a 300 litre expansion vessel or less, or chilled systems utilising a 50 litre expansion vessel or less. Available in single or twin pump configuration.

 
Installation

The Flexfiller pressurisation unit should be connected to the system at the same point as the expansion vessel to provide a neutral pressure reading.   
 

Operating Conditions

• System temperature range at point of connection: 5 ºC / 85 ºC.
• Ambient temperature range: 5 ºC / 40 ºC.
• Pressure rating: PN 10.
• Relative humidity 95% non-condensing.
• Noise Rating Data: < 75 dBA.

 
Features

• For system volumes up to 2,600 litres.
• Fluid Protection Category 5 (AB Weir Overflow).
• Onscreen Service Reminder - 12 Months.
• Electric pump, 230V 50Hz 1ph.
• Colour: White (RAL 9003).
• MODBUS RTU Communication Protocol.
• Password protected.
• Sequential programming menu.
• Pressure setting in 0.1 bar increments.
• Pump pulse option.
• Flood Protection (Pump Runtime Limiter, Excessive Start Alarm).
• Event logging: Alarm activations, Pump Run counter (activations per pump), Cumulative run timer (hours per pump), Electrical interuption.
• Volt free contacts: Common Alarm (N/C), High Pressure Alarm (N/O), Low Pressure Alarm (N/O), Sensor Health (N/O), Pump 1 Health (N/O), Pump 2 Health (N/O).