Free Delivery

Free Standard Delivery

On Most Products Over £100 ex VAT

Secure Payments

Secure Payments Online

We Accept All Major Credit Cards & PayPal

Our Experience

Our Experience

We Are Experts in Product Selection

Service Maintenance

Service and Maintenance

Network of Engineers throughout the UK

Sectional Water Tanks

GRP Sectional storage tanks are designed in a modular format which allows a comprehensive range of tank sizes and configurations, comprising individual bolt-up panels which are assembled on site.

Designed for two specific applications:

  • For storing water in large capacities from 125 litres up to 2,000,000 litres
  • To allow the site assembly of a water storage tank where access restrictions or other conditions deny the installation of one and two piece tanks.

Externally Flanged Base Tanks (EFB)
Positioning onto raised supports, typically to provide a positive head of pressure to an adjacent pump set or similar equipment. Where an insulated base is required and there is sufficient working room all around the tank.

EFB tanks are suitable for positioning onto raised supports at 1000mm or 500mm centres depending on the tank size and configuration, foundation normally comprises of brick built or concrete dwarf walls.
Comprising of an externally flanged base, externally flanged sides, internally flanged roof, Insulated to the base, sides and cover.

EFB tanks require a minimum of 500mm working clearance all around the tank, a minimum of 600mm above the man-way height and/or 350mm above any raised float valve housing.

Internally Flanged Base Tanks (IFB)
The most cost effective sectional tank format suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab.

Comprising of an internally flanged base, externally flanged sides, internally flanged roof and insulated to the sides and cover only.

IFB tanks require a minimum of 500mm working clearance all around the tank, a minimum of 600mm above the man-way height and/or 350mm above any raised float valve housing.

Totally internally Flanged Tanks (TIF)
TIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab.Suitable for applications where there is minimal working room available all panel joint flanges are accessed from inside the tank.

Comprising of an internally flanged base, internally flanged sides, internally flanged roof and insulated to the sides and cover.

TIF tanks require a minimum of 50mm maneuvering clearance all around the tank, a minimum of 600mm above the man-way height and/or 350mm above any raised float valve housing.

Delivery generally 2 weeks. (Made to order non-returnable)

Please note the options of valves, essex flanges are supplied loose if selected.

There are no products matching the selection.