Calpeda Idromat 5-12 Electronic Pressure Regulator

Calpeda Idromat 5-12 Electronic Pressure Regulator

Construction
Regulation device for pump control equipped with flow and pressure sensor connected to an electronic system.
Inlet and delivery connection ports of the same diameter (G1).
Built-in check valve.
Pressure gauge 0-12 bar supplied as standard for the IDROMAT 5 models.
Automatic reset function for the reset of the system without manual operation.

Applications
Automatic control of pumps for water supply and increase of network pressure.
Control of starting/stopping of the pump when cocks are opened/closed.

For protection of the pump:

• against dry running;
• against the risk of operation without water at the inlet (caused by a lack of water inflow in the inlet pipe under positive suction head, by a non-immersed suction pipe, by excessive suction lift or by air entering the suction pipe); against operation with closed connection ports.
• Cut in Pressure - 1.2bar
• Pump Head > 25m

The CALPEDA Idromat 5-12 Electronic Pressure Regulator has replaced the 3-12 model